range melting

英 [reɪndʒ ˈmeltɪŋ] 美 [reɪndʒ ˈmeltɪŋ]

网络  熔化范围

医学



双语例句

  1. The results showed most nucleating agents made the fusion range Δ T m, crystallinity and melting entropy decreased, while the crystallization temperature increased, the degree of supercooling and width at half-height decreased.
    结果表明:大部分成核剂的加入对尼龙66熔点影响不大,而熔程ΔTm、结晶度和熔融熵降低;结晶峰值温度Tc升高,过冷度ΔTc和半高宽D降低;
  2. The melt flow properties and the spinning temperature range of far infrared polypropylene ( PP) fiber were investigated. The relation between melting index of far infrared PP slice and spinning speed was discussed.
    研究了远红外丙纶熔体的流动特性和合理的纺丝温度范围,讨论了远红外丙纶切片的熔融指数与纺丝速度的关系。
  3. Due to insertion of ethylene comonomer in PP backbone, melting temperature range lowered and some melting peaks at high temperature disappeared.
    而共聚单体的插入会明显降低熔融温度范围,使部分高温区间的熔融峰消失。
  4. The contents of this paper are as follows: ( 1) The local vacuum range above the molybdenum melting pool during the process of eletron-beam welding and the effect of technological factors on it are investigated.
    本文包括如下内容:(1)研究了电子束焊钼时,熔池区域局部真空度及焊接工艺对局都真空度的影响。
  5. The methed for measuring melting Point range of hot melt adhesive was discussed. The calculation method for evaluating the melting point of the adhesive us also discussed.
    本文就服装粘合衬布用热熔胶及热熔胶胶浆熔点范围测定方法、计算方法进行了分析和讨论,阐述了热熔胶及热熔胶浆的熔点(范围)的测定方法和计算方法。
  6. The results point out that over the temperature range form RT to the melting temperature of the sample, the thickness of the sample after pressure expansion increases with the heat treatment temperature.
    结果表明,在从常温至PP熔融温区内,压力膨化工艺处理后PP蜂窝膜的厚度随着热处理温度的升高而逐渐增大;
  7. It is also noted that with the same composition, the crystallinity of PET in the blends formed from the glassy state is higher than that formed from melt but the former has lower onset temperature and more broad range of melting.
    相同组成的共混物从玻璃态结晶比从熔体结晶所达到的结晶度高,但起始熔融温度低,熔程宽,表明生成较多的不规整的微晶体。
  8. The steep change of the sticking coefficient in the temperature range 110-120 ℃ may be explained by a model of the order-disorder transition arisen from the surface melting.
    在110&120℃温区内发生的粘着系数的阶跃变化可以用表面熔化所导致的有序-无序的相变模型来解释;
  9. The temperature range and ongoing time of grafting reaction depend on decomposition character of initiators, reaction activity of silanes, and melting character and reaction capability of PEs.
    发生接枝反应的温度范围和经历时间,依赖于引发剂的分解特性、硅烷的反应活性、PE的熔化特性和反应能力;
  10. The composition and range of flux in mould for high speed continuous casting thin slab were determined through basic research on physical and chemical properties as well as melting characteristics of flux.
    通过对保护渣理化性能、熔化特性的基础研究,确定了适合高拉速薄板坯连铸用保护渣的组成及成分范围。
  11. There was a vibrational intensity range corresponding with different materials, screw revolution speed and barrel temperature, and the melting process would be accelerated with the increase of the intensity of the vibration within the range.
    对应不同的材料,不同的螺杆转速、料筒温度设置等工艺条件存在一个振动强度范围,在此范围内随着振动强度的增加,熔融速度进一步加快。
  12. Study on the Influence of Limitation of Particle Size Range on the Quality of Glass Melting
    砂岩粒径上下限对玻璃熔制质量的影响
  13. The results show that when the aluminate coefficient ( Am) of steel slag is within the range of 0.7-0.9, an aluminate cementitious material with a high early strength can be obtained by melting method modification.
    结果表明,调整钢渣铝酸盐碱度系数为0.7~0.9时,利用熔融法获得快硬而不快凝和高早强的铝酸盐胶凝材料。
  14. NG-rotating arc can enlarge the range of welding parameters but have little effect on melting efficiency of welding wires, so the improvement of weld formation is not from change of whole welding heat input but from its reasonable distribution.
    窄间隙旋转电弧还可以增大焊接规范区间,但对焊丝熔化效率影响不大,因而旋转电弧改变焊缝成形完全是由于电弧热量的合理分配,而不是通过改变整体焊接热输入。
  15. But the nematic range and the melting points increased in a zigzag mode as n increases. ( 2) In series II, 10 compounds were synthesized and and 9 of them exhibited liquid-crystalline properties.
    在系列II中,共合成了10种化合物,其中有9种化合物具有明显液晶性质。